Datasheet4U Logo Datasheet4U.com

LP8358 - 150mA/ UCap/ Low Dropout Voltage Regulator

General Description

The LP8358 is a µCap, precise CMOS voltage regulator with low Power good output RDSON.

It provides up to 150mA and consumes a typical of 10nA in shutdown mode.

The LP8358 output stage is designed with a push pull output for faster transient recovery response.

Key Features

  • n n n n n n n n n n Low power good RDSON: 20Ω Power good indicator Stability with low ESR capacitors Low ground current: 120µA 150mA output current "Zero" shutdown current mode Fast transient recovery response Auto discharge Thermal shutdown Current limiting.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LP8340 1.0A CMOS Linear Regulator Texas Instruments
LP801 SILICON GATE ENHANCEMENT MODE RF POWER LDMOS TRANSISTOR Polyfet RF Devices
LP801 SILICON GATE ENHANCEMENT MODE RF POWER LDMOS TRANSISTOR Polyfet RF Devices
LP801B Encoder/Decoder Shenzhen
LP802 SILICON GATE ENHANCEMENT MODE RF POWER LDMOS TRANSISTOR Polyfet RF Devices

Other Datasheets by National Semiconductor (now Texas Instruments)

Part Number Description
LP8340 Low Dropout/ Low IQ/ 1.0A CMOS Linear Regulator
LP8345 Low Dropout/ Low IQ/ 500mA CMOS Linear Regulator
LP8545 High-Efficiency LED Backlight Driver
LP8720 One Step-Down DC/DC and Five Linear Regulators
LP8725 Power Management

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
LP8358 150mA, µCap, Low Dropout Voltage Regulator with Power Good February 2003 LP8358 150mA, µCap, Low Dropout Voltage Regulator with Power Good General Description The LP8358 is a µCap, precise CMOS voltage regulator with low Power good output RDSON. It provides up to 150mA and consumes a typical of 10nA in shutdown mode. The LP8358 output stage is designed with a push pull output for faster transient recovery response. The LP8358 is optimized to work with low value, low cost ceramic capacitors. The output typically require only 1µF of output capacitance for stability. The enable pin can be tied to VIN for easy board layout. The LP8358 is designed for portable, battery powered equipment applications with small space requirements. The LP8358 is available in a 5-pin SOT-23 package.