Datasheet4U Logo Datasheet4U.com

LPC660 - Low Power CMOS Quad Operational Amplifier

Datasheet Summary

Description

The LPC660 CMOS Quad operational amplifier is ideal for operation from a single supply.

Features

  • a wide range of operating voltages from +5V to +15V and features rail-to-rail output swing in addition to an input common-mode range that includes ground. Performance limitations that have plagued CMOS amplifiers in the past are not a problem with this design. Input VOS, drift, and broadband noise as well as voltage gain (into 100 kΩ and 5 kΩ) are all equal to or better than widely accepted bipolar equivalents, while the power supply requirement is typically less than 1 mW. This chip is built wi.

📥 Download Datasheet

Datasheet preview – LPC660

Datasheet Details

Part number LPC660
Manufacturer National Semiconductor
File Size 603.87 KB
Description Low Power CMOS Quad Operational Amplifier
Datasheet download datasheet LPC660 Datasheet
Additional preview pages of the LPC660 datasheet.

📁 Similar Datasheet

  • LPC660 - Low Power CMOS Quad Operational Amplifier (Texas Instruments)
  • LPC10065 - choke coil inductor (KOA Speer Electronics)
  • LPC1100 - Cortex-M0 based microcontrollers (NXP Semiconductors)
  • LPC1101LVUK - 32-bit ARM Cortex-M0 MCU (NXP)
  • LPC1102 - 32-bit ARM Cortex-M0 microcontroller (NXP Semiconductors)
  • LPC1102LVUK - 32-bit ARM Cortex-M0 MCU (NXP)
  • LPC1104 - (LPC1102 / LPC1104) 32-bit ARM Cortex-M0 microcontroller (NXP)
  • LPC1110 - (LPC1110 - LPC1115) 32-bit ARM Cortex-M0 microcontroller (NXP)
  • LPC1111 - 32-bit ARM Cortex-M0 microcontroller (NXP)
  • LPC1112 - (LPC1110 - LPC1115) 32-bit ARM Cortex-M0 microcontroller (NXP)
Other Datasheets by National Semiconductor
  • LPC661 - Low Power CMOS Operational Amplifier
  • LPC662 - Low Power CMOS Dual Operational Amplifier

Full PDF Text Transcription

Click to expand full text
LPC660 Low Power CMOS Quad Operational Amplifier March 1998 LPC660 Low Power CMOS Quad Operational Amplifier General Description The LPC660 CMOS Quad operational amplifier is ideal for operation from a single supply. It features a wide range of operating voltages from +5V to +15V and features rail-to-rail output swing in addition to an input common-mode range that includes ground. Performance limitations that have plagued CMOS amplifiers in the past are not a problem with this design. Input VOS, drift, and broadband noise as well as voltage gain (into 100 kΩ and 5 kΩ) are all equal to or better than widely accepted bipolar equivalents, while the power supply requirement is typically less than 1 mW. This chip is built with National’s advanced Double-Poly Silicon-Gate CMOS process.
Published: |