Datasheet4U Logo Datasheet4U.com

LPC662 - Low Power CMOS Dual Operational Amplifier

Datasheet Summary

Description

The LPC662 CMOS Dual operational amplifier is ideal for operation from a single supply.

Features

  • a wide range of operating voltage from +5V to +15V, rail-to-rail output swing in addition to an input common-mode range that includes ground. Performance limitations that have plagued CMOS amplifiers in the past are not a problem with this design. Input VOS, drift, and broadband noise as well as voltage gain (into 100 kΩ and 5 kΩ) are all equal to or better than widely accepted bipolar equivalents, while the power supply requirement is typically less than 0.5 mW. This chip is built with National.

📥 Download Datasheet

Datasheet preview – LPC662

Datasheet Details

Part number LPC662
Manufacturer National Semiconductor
File Size 596.48 KB
Description Low Power CMOS Dual Operational Amplifier
Datasheet download datasheet LPC662 Datasheet
Additional preview pages of the LPC662 datasheet.

📁 Similar Datasheet

  • LPC660 - Low Power CMOS Quad Operational Amplifier (Texas Instruments)
  • LPC10065 - choke coil inductor (KOA Speer Electronics)
  • LPC1100 - Cortex-M0 based microcontrollers (NXP Semiconductors)
  • LPC1101LVUK - 32-bit ARM Cortex-M0 MCU (NXP)
  • LPC1102 - 32-bit ARM Cortex-M0 microcontroller (NXP Semiconductors)
  • LPC1102LVUK - 32-bit ARM Cortex-M0 MCU (NXP)
  • LPC1104 - (LPC1102 / LPC1104) 32-bit ARM Cortex-M0 microcontroller (NXP)
  • LPC1110 - (LPC1110 - LPC1115) 32-bit ARM Cortex-M0 microcontroller (NXP)
  • LPC1111 - 32-bit ARM Cortex-M0 microcontroller (NXP)
  • LPC1112 - (LPC1110 - LPC1115) 32-bit ARM Cortex-M0 microcontroller (NXP)
Other Datasheets by National Semiconductor
  • LPC660 - Low Power CMOS Quad Operational Amplifier
  • LPC661 - Low Power CMOS Operational Amplifier

Full PDF Text Transcription

Click to expand full text
LPC662 Low Power CMOS Dual Operational Amplifier August 2000 LPC662 Low Power CMOS Dual Operational Amplifier General Description The LPC662 CMOS Dual operational amplifier is ideal for operation from a single supply. It features a wide range of operating voltage from +5V to +15V, rail-to-rail output swing in addition to an input common-mode range that includes ground. Performance limitations that have plagued CMOS amplifiers in the past are not a problem with this design. Input VOS, drift, and broadband noise as well as voltage gain (into 100 kΩ and 5 kΩ) are all equal to or better than widely accepted bipolar equivalents, while the power supply requirement is typically less than 0.5 mW. This chip is built with National’s advanced Double-Poly Silicon-Gate CMOS process.
Published: |