LM1036 Datasheet | National Semiconductor

Description The LM1036 is a DC controlled tone (bass/treble), volume and balance circuit for stereo applications in car radio, TV and audio systems. An additional control input allows loudness pensation to be simply effected. Four control inputs provide control of the bass, treble, balance and volume functions through application of DC voltages from a remote control system or, alternatively, from four potentiometers which may be biased from a zener regulated supply provided on the circuit. Each tone response is defined by a single capacitor chosen to give the desired characteristic. Features Wide supply voltage range, 9V to 16V Large volume control range, 75 d B typical Tone control, ± 15 d B typical Channel separation, 75 d B typical Low distortion, 0.06% typical for an input level of 0.3 Vrms n High signal to noise, 80 d B typical for an input level of 0.3 Vrms n Few external ponents required n n n n n Block and Connection Diagram Dual-In-Line Package DS005142-1 Order Number LM1036N See NS Package Number N20A © 1999 National Semiconductor Corporation DS005142 .national. Absolute Maximum Ratings (Note 1) If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. Supply Voltage Control Pin Voltage (Pins 4, 7, 9, 12, 14) Operating Temperature Range 16V VCC 0˚C to +70˚C Storage Temperature Range Power Dissipation Lead Temp. (Soldering, 10 seconds) - 65˚C to +150˚C 1W 260˚C Note 1: “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. Electrical Characteristics VCC = 12V, TA = 25˚C (unless otherwise stated) Parameter Supply Voltage Range Supply Current Zener Regulated Output Voltage Current Maximum Output Voltage Pins 8, 13; f = 1 k Hz VCC = 9V, Maximum Gain VCC = 12V Maximum Input Voltage Input Resistance...