AMIS-42665
AMIS-42665 is High-Speed Low Power CAN Transceiver manufactured by onsemi.
Description
The AMIS- 42665 CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12 V and 24 V systems. The transceiver provides differential transmit capability to the bus and differential receive capability to the CAN controller.
Due to the wide mon- mode voltage range of the receiver inputs, the AMIS- 42665 is able to reach outstanding levels of electromagnetic susceptibility (EMS). Similarly, extremely low electromagnetic emission (EME) is achieved by the excellent matching of the output signals.
The AMIS- 42665 is a new addition to the CAN high- speed transceiver family and offers the following additional features
:
Features
- Wake- up (WU) Over Bus
- Voltage Source via VSPLIT Pin for Stabilizing the Recessive Bus
Level (Further EMC Improvement)
- Ideal Passive Behavior when Supply Voltage is Removed
- Extremely Low Current Standby Mode
- patible with the ISO 11898 Standard (ISO 11898- 2, ISO
11898- 5 and SAE J2284)
- High Speed (up to 1 Mbps)
- Ideally Suited for 12 V and 24 V Industrial and Automotive
Applications
- Extremely Low Current Standby Mode with Wake- up via the Bus
.Dat- a SLheoewt4UE.Mco Emmon- Mode Choke is No Longer Required
- Differential Receiver with Wide mon- Mode Range ($35 V) for
High EMS
- Transmit Data (Tx D) Dominant Time- out Function
- Thermal Protection
- Bus Pins Protected against Transients in an Automotive Environment
- Power Down Mode in which the Transmitter is Disabled
- Bus and VSPLIT Pins Short Circuit Proof to Supply Voltage and
Ground
- Logic Level Inputs patible with 3.3 V Devices
- These are Pb- Free Devices http://onsemi.
MARKING DIAGRAM
8 1
SOIC- 8 CASE 751
XXXXX ALYW
G 1
XXXXX = Specific Device Code A = Assembly Location L = Wafer Lot Y = Year W = Work Week
G = Pb- Free Package
PIN ASSIGNMENT
Tx D 1 GND 2 VCC 3 Rx D 4
AMIS- 42665
8 STB 7 CANH 6 CANL 5...
