AMIS-42670 Datasheet | onsemi

Description The AMIS- 42670 CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12 V and 24 V systems. The transceiver provides differential transmit capability to the bus and differential receive capability to the CAN controller. Due to the wide mon- mode voltage range of the receiver inputs, the AMIS- 42670 is able to reach outstanding levels of electromagnetic susceptibility (EMS). Similarly, extremely low electromagnetic emission (EME) is achieved by the excellent matching of the output signals. The AMIS- 42670 is the industrial version of the AMIS- 30660 and primarily intended for applications where long network lengths are mandatory. Examples are elevators, in- building networks, process control and trains. To cope with the long bus delay the munication speed needs to be low. AMIS- 42670 allows low transmit data rates down 10 kbit/s or lower. Features http://onsemi. PIN ASSIGNMENT Tx D GND VCC Rx D 1 2 3 4 8 7 6 5 S CANH CANL VREF (Top View) AMIS- 42670 PC20041204.3 Fully patible with the ISO 11898- 2 Standard Certified “Authentication on CAN Transceiver Conformance (d1.1)” Wide Range of Bus munication Speed (0 Mbit/s up to 1 Mbit/s) Allows Low Transmit Data Rate in Networks Exceeding 1 km Ideally Suited for 12 V and 24 V Industrial and Automotive Applications - Low Electromagnetic Emission (EME) mon- Mode Choke is No Longer Required .. - Differential Receiver with Wide mon- Mode Range ($35 V) for High EMS - No Disturbance of the Bus Lines with an Unpowered Node - Thermal Protection - Bus Pins Protected Against Transients - Silent Mode in which the Transmitter is Disabled - Short Circuit Proof to Supply Voltage and Ground - Logic Level Inputs patible with 3.3 V Devices - These are Pb- Free Devices- - - - - - ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 9 of this data sheet. - For additional information on our...