CMPWR150 Datasheet | onsemi

Description The CMPWR150 is a low dropout regulator that delivers up to 500 m A of load current at a fixed 3.3 V output. An internal threshold level (typically 4.1 V) is used to prevent the regulator from being operated below dropout voltage. The device continuously monitors the input supply and will automatically disable the regulator when VCC falls below the threshold level. When the regulator is disabled, the control signal “Drive” (Active Low) is enabled, which allows an external PMOS switch to power the load from an auxiliary 3.3 V supply. When VCC is restored to a level above the select threshold, the control signal for the external PMOS switch is disabled and the regulator is once again enabled. All the necessary control circuitry needed to provide a smooth and automatic transition between the supplies has been incorporated. This allows VCC to be dynamically switched without loss of output voltage. The CMPWR150 is housed in an 8- pin SOIC thermally enhanced package which is ideal for space critical applications. The CMPWR150 is available with Ro HS pliant lead- free finishing. Features - Automatic Detection of VCC Input Supply - Drive Output Logic to Control External Switch - Glitch- Free Output During Supply Transitions - 500 m A Output Maximum Load Current - Built- In Hysteresis During Supply Selection - Controller Operates from Either VCC or VOUT - 8- Pin Power SOIC Thermal Package - These Devices are Pb- Free and are Ro HS pliant Applications - PCI Adapter Cards - Network Interface Cards (NICs) - Dual Power Systems - Systems with Standby Capabilities - USB Powered Devices Such as Printers, Scanners, MP3 Players and Zip Drives - See Application Note AP- 211 http://onsemi. SIOC 8 SF SUFFIX CASE 751BD MARKING DIAGRAM CMPWR150SF CMPWR150SF = Specific Device Code ORDERING INFORMATION Device CMPWR150SF Package Shipping† SOIC 2500/Tape & Reel (Pb- Free) †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our...