Datasheet4U Logo Datasheet4U.com

CS1108 - Single Lamp Driver

General Description

PACKAGE PIN # 8 Lead SO Narrow 1 2 3 4 5, 6, 7, 8 PIN SYMBOL Output VCC Fault Control Ground Open collector output.

5.0 V regulated supply input.

Open collector diagnostic output low during open load, short circuit and overtemperature conditions.

Key Features

  • Fault Detection.
  • Open Circuit.
  • Short Circuit.
  • Overtemperature.
  • VCC Sense: Output Turns On with Loss of VCC.
  • Low Standby Current.
  • Internally Fused Leads in SO.
  • 8 Package http://onsemi. com 8 1 SO.
  • 8 DF SUFFIX CASE 751 PIN.

📥 Download Datasheet

Datasheet Details

Part number CS1108
Manufacturer onsemi
File Size 71.67 KB
Description Single Lamp Driver
Datasheet download datasheet CS1108 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CS1108 Single Lamp Driver Cherry Semiconductor Corporation
CS1100L Current Sensors Coilcraft
CS1101 DIMENSIONS SCHEMATIC & PC LAYOUT CIT Relay
CS1102 CIT SWITCH ETC
CS1107 Single Relay Driver Cherry Semiconductor Corporation

Other Datasheets by onsemi

Part Number Description
CS1107 Single Relay Driver
CS1112 Quad Power Output Driver
CS1124 Dual Variable-Reluctance Sensor Interface IC
CS1087 Vacuum Fluorescent Display Tube Driver
CS1088 Vacuum Fluorescent Display Tube Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com CS1108 Single Lamp Driver IC This ASIC provides up to 350 mA of drive current for powering bulbs. The typical application for this part is for use in airbag systems using a type 194 bulb. On–chip diagnostics provide open circuit and short circuit detection in the output on mode. In addition, the output driver will turn on (sink current) when VCC is low. Fault is an active–low output which reports in the output–on mode. Internal pull–up circuitry is provided to ensure the output pin turns on when the Control pin is floating. Features • Fault Detection – Open Circuit – Short Circuit – Overtemperature • VCC Sense: Output Turns On with Loss of VCC • Low Standby Current • Internally Fused Leads in SO–8 Package http://onsemi.