These pins are internally pulled up to 5.0 V providing logic ones if left open.
VID4 selects the DAC range.
Key Features
on board, 5.
bit DAC, short circuit protection, 0.8% output tolerance for the 01111 DAC code (1.3 V) and 1.0% for the remaining DAC codes, VCC monitor, and programmable Soft Start capability. The CS5158 is available in 16 pin surface mount. Features.
Dual N.
Channel Design.
Excess of 1.0 MHz Operation.
100 ns Transient Response.
5.
Bit DAC.
30 ns Gate Rise/Fall Times.
0.8% Accuracy for the 01111 DAC Code and 1.0% for the.
Full PDF Text Transcription for CS5158 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
CS5158. For precise diagrams, and layout, please refer to the original PDF.
www.DataSheet4U.com CS5158 CPU 5−Bit Synchronous Buck Controller The CS5158 is a 5−bit synchronous dual N−Channel buck controller. It is designed to provide unprecedented...
View more extracted text
ual N−Channel buck controller. It is designed to provide unprecedented transient response for today’s demanding high−density, high−speed logic. The regulator operates using a proprietary control method, which allows a 100 ns response time to load transients. The CS5158 is designed to operate over a 4.25−16 V range (VCC) using 12 V to power the IC and 5.0 V as the main supply for conversion. The CS5158 is specifically designed to power Pentium® II processors and other high performance core logic. It includes the following features: on board, 5−bit DAC, short circuit protection, 0.8% output tolerance for the 01111 DAC code (
CS5158 Datasheet
