CS5201-1 Datasheet Text
..
CS5201- 1 1.0 A Adjustable Linear Regulator
The CS5201- 1 linear regulator provides 1.0 A with an output voltage accuracy of ±1.0 %. The device uses two external resistors to set the output voltage within a 1.25 V to 5.5 V range. This regulator is intended for use as a post regulator and microprocessor supply. The fast loop response and low dropout voltage make this regulator ideal for applications where low voltage operation and good transient response are important. The circuit is designed to operate with dropout voltages less than 1.2 V at 1.0 A output current. Device protection includes overcurrent and thermal shutdown. The CS5201 is pin patible with the LT1086 family of linear regulators. The regulator is available in TO- 220, surface mount D2, and SOT- 223 packages.
Features http://onsemi.
TO- 220- 3 T SUFFIX CASE 221A 1
2
3 D2PAK- 3 DP SUFFIX CASE 418AB
Tab = VOUT Pin 1. Ad 2. VO 3. VI
- -
- -
- -
Pb- Free Package is Available Output Current to 1.0 A Output Accuracy to ±1.0% Overtemperature Dropout Voltage (typical) 1.0 V @ 1.0 A Fast Transient Response Fault Protection
- Current Limit
- Thermal Shutdown
12
3 SOT- 223 ST SUFFIX CASE 318E
1
23
ORDERING INFORMATION
See detailed ordering and shipping information in the package dimensions section on page 7 of this data sheet.
5.0 V
DEVICE MARKING INFORMATION
VIN VOUT 3.3 V @ 1.0 A 124 W 1.0% 22 mF 5.0 V
See general marking information in the device marking section on page 7 of this data sheet.
CS5201- 1 Adj
10 mF 5.0 V
0.1 mF 5.0 V Tant
200 W 1.0%
Figure 1. Applications Diagram
© Semiconductor ponents Industries, LLC, 2006...
