Datasheet4U Logo Datasheet4U.com

LV8713T - PWM Constant-Current Control Stepping Motor Driver

General Description

(1) Power save function This IC is switched between standby and operating mode by setting the PS pin.

In standby mode, the IC is set to power-save mode and all logic is reset.

In addition, the internal regulator circuit do not operate in standby mode.

Key Features

  • Single-channel PWM constant-current control stepping motor driver incorporated.
  • Control mode can be set to 2-phase, 1-2 phase, 4W1-2 phase , or 8W1-2 phase.
  • Microstep can control easily by the CLK-IN input.
  • Power-supply voltage of motor : VM max = 18V.
  • Output current : IO max = 0.8A.
  • Output ON resistance : RON = 1.1Ω (upper and lower total, typical, Ta = 25°C ).
  • A thermal shutdown circuit and a low voltage detecting circ.

📥 Download Datasheet

Datasheet Details

Part number LV8713T
Manufacturer onsemi
File Size 239.59 KB
Description PWM Constant-Current Control Stepping Motor Driver
Datasheet download datasheet LV8713T Datasheet

Full PDF Text Transcription for LV8713T (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for LV8713T. For precise diagrams, and layout, please refer to the original PDF.

Ordering number : ENA1918 LV8713T Bi-CMOS LSI PWM Constant-Current Control Stepping Motor Driver http://onsemi.com Overview The LV8713T is a stepping motor driver of the ...

View more extracted text
p://onsemi.com Overview The LV8713T is a stepping motor driver of the micro-step drive corresponding to supports 8W 1-2 phase excitation. It is the best for the drive of the stepping motor for a scanner and a small printer. Features • Single-channel PWM constant-current control stepping motor driver incorporated. • Control mode can be set to 2-phase, 1-2 phase, 4W1-2 phase , or 8W1-2 phase • Microstep can control easily by the CLK-IN input. • Power-supply voltage of motor : VM max = 18V • Output current : IO max = 0.8A • Output ON resistance : RON = 1.1Ω (upper and lower total, typical, Ta = 25°C ) • A thermal shutdown cir

📁 Similar Datasheet

Brand Logo Part Number Description Manufacturer
Sanyo Semicon Device Logo LV8713T PWM Constant-Current Control Stepping Motor Driver Sanyo Semicon Device

More Datasheets from onsemi

Part Number Description
LV8711T PWM Constant-Current Control Stepping Motor Driver
LV8712T PWM Constant-Current Control Stepping Motor Driver
LV8714TA Dual Stepper Motor Driver
LV8702V PWM Current Control High-efficient Stepper Motor Driver
LV8726TA Stepper Motor Pre-Driver
LV8727 PWM Current Control Stepping Motor Driver
LV8728MR Stepper Motor Driver
LV8729V PWM Constant-Current Control Stepper Motor Driver
LV8731V PWM Constant-Current Control Stepping Motor Driver
LV8732V PWM Constant-Current Control Stepping Motor Driver