LV8713T Datasheet PDF (PWM Constant-Current Control Stepping Motor Driver)

LV8713T - PWM Constant-Current Control Stepping Motor Driver

Features

Single-channel PWM constant-current control stepping motor driver incorporated.
Control mode can be set to 2-phase, 1-2 phase, 4W1-2 phase , or 8W1-2 phase.
Microstep can control easily by the CLK-IN input.
Power-supply voltage of motor : VM max = 18V.
Output current : IO max = 0.8A.
Output ON resistance : RON = 1.1Ω (upper and lower total, typical, Ta = 25°C ).
A thermal shutdown circuit and a low voltage detecting circuit are bu.

Datasheet Details

Part number	LV8713T
Manufacturer	Sanyo Semicon Device
File Size	370.61 KB
Description	PWM Constant-Current Control Stepping Motor Driver
Datasheet	LV8713T Datasheet
Additional preview pages of the LV8713T datasheet.

📁 Similar Datasheet

LV8713T - PWM Constant-Current Control Stepping Motor Driver (ON Semiconductor)

LV8711T - PWM Constant-Current Control Stepping Motor Driver (ON Semiconductor)

LV8712T - PWM Constant-Current Control Stepping Motor Driver (ON Semiconductor)

LV8714TA - Dual Stepper Motor Driver (ON Semiconductor)

LV8702V - PWM Current Control High-efficient Stepper Motor Driver (ON Semiconductor)

LV8726TA - Stepper Motor Pre-Driver (ON Semiconductor)

LV8727 - PWM Current Control Stepping Motor Driver (ON Semiconductor)

LV8728MR - Stepper Motor Driver (ON Semiconductor)

LV8729V - PWM Constant-Current Control Stepper Motor Driver (ON Semiconductor)

LV8731V - PWM Constant-Current Control Stepping Motor Driver (ON Semiconductor)

Full PDF Text Transcription

Click to expand full text

www.DataSheet.co.kr Ordering number : ENA1918 LV8713T Overview Bi-CMOS LSI PWM Constant-Current Control Stepping Motor Driver The LV8713T is a stepping motor driver of the micro-step drive corresponding to supports 8W 1-2 phase excitation. It is the best for the drive of the stepping motor for a scanner and a small printer. Features • Single-channel PWM constant-current control stepping motor driver incorporated. • Control mode can be set to 2-phase, 1-2 phase, 4W1-2 phase , or 8W1-2 phase • Microstep can control easily by the CLK-IN input. • Power-supply voltage of motor : VM max = 18V • Output current : IO max = 0.8A • Output ON resistance : RON = 1.1Ω (upper and lower total, typical, Ta = 25°C ) • A thermal shutdown circuit and a low voltage detecting circuit are built into.

Published: Jan 5, 2012 |