Datasheet4U Logo Datasheet4U.com

MC10H646 - PENTIUM MICROPROCESSOR PECL/TTL-TTL CLOCK DRIVER

General Description

The MC10H/100H646 is a single supply, low skew translating 1:8 clock driver.

lead PLCC for optimal power pinning, signal flow through and electrical performance.

Key Features

  • http://onsemi. com PLCC.
  • 28 FN SUFFIX CASE 776.

📥 Download Datasheet

Datasheet Details

Part number MC10H646
Manufacturer onsemi
File Size 155.04 KB
Description PENTIUM MICROPROCESSOR PECL/TTL-TTL CLOCK DRIVER
Datasheet download datasheet MC10H646 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MC10H646 PECL/TTL-TTL 1:8 Clock Distribution Chip Motorola
MC10H640 PECL to TTL Clock Driver Motorola
MC10H641 SINGLE SUPPLY PECL-TTL 1:9 CLOCK DISTRIBUTION CHIP Motorola
MC10H642 68030/040 PECL-TTL CLOCK DRIVER Motorola
MC10H642 68030/040 PECL-TTL CLOCK DRIVER Motorola

Other Datasheets by onsemi

Part Number Description
MC10H640 PECL-TTL CLOCK DRIVER
MC10H641 SINGLE SUPPLY PECL-TTL 1:9 CLOCK DISTRIBUTION CHIP
MC10H642 68030/040 PECL-TTL CLOCK DRIVER
MC10H643 DUAL SUPPLY ECL-TTL 1:8 CLOCK DRIVER
MC10H644 68030/040 PECL-TTL CLOCK DRIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com MC10H646, MC100H646 PECL/TTL−TTL 1:8 Clock Distribution Chip Description The MC10H/100H646 is a single supply, low skew translating 1:8 clock driver. Devices in the ON Semiconductor H646 translator series utilize the 28−lead PLCC for optimal power pinning, signal flow through and electrical performance. The single supply H646 is similar to the H643, which is a dual supply 1:8 version of the same function. The H646 was designed specifically to drive series terminated transmission lines. Special techniques were used to match the HIGH and LOW output impedances to about 7.0 W. This simplifies the choice of the termination resistor for series terminated applications. To match the HIGH and LOW output impedances, it was necessary to remove the standard IOS limiting resistor.