MC14504B - Hex Level Shifter

onsemi

Key Features

UP Translates from a Low to a High Voltage or DOWN Translates from a High to a Low Voltage.
Input Threshold Can Be Shifted for TTL Compatibility.
No Sequencing Required on Power Supplies or Inputs for Power Up or Power Down.
3 to 18 Vdc Operation for VDD and VCC.
Diode Protected Inputs to VSS.
Capable of Driving Two Low.
Power TTL Loads or One Low.
Power Schottky TTL Load Over the Rated Temperature Range.
NLV Prefix for Automotive and Other Appli.

MC14504B hex level shifter by onsemi - Datasheet Preview

Datasheet Details

Part number	MC14504B
Manufacturer	onsemi
File Size	313.38 KB
Description	Hex Level Shifter
Datasheet	MC14504B Datasheet

📁 Similar Datasheet

Part Number	Description	Manufacturer
MC14504B	Hex Level Shifter	Motorola
MC145040	8-Bit A/D Converters	Motorola
MC145041	8-Bit A/D Converters	Motorola
MC145000	SERIAL INPUT MULTIPLEXED LCD DRIVERS	Motorola
MC145001	SERIAL INPUT MULTIPLEXED LCD DRIVERS	Motorola

Other Datasheets by onsemi

Part Number	Description
MC14503B	Hex Non-Inverting 3-State Buffer
MC14511B	BCD-To-Seven Segment Latch/Decoder/Driver
MC14512B	8-Channel Data Selector
MC14513B	BCD-To-Seven Segment Latch/Decoder/Driver
MC14514B	4-Bit Transparent Latch/4-to-16-Line Decoder

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text

DATA SHEET www.onsemi.com Hex Level Shifter for TTL to CMOS or CMOS to CMOS MC14504B SOIC−16 D SUFFIX CASE 751B TSSOP−16 DT SUFFIX CASE 948F The MC14504B is a hex non−inverting level shifter using CMOS technology. The level shifter will shift a TTL signal to CMOS logic levels for any CMOS supply voltage between 5 and 15 volts. A control input also allows interface from CMOS to CMOS at one logic level to another logic level: Either up or down level translating is accomplished by selection of power supply levels VDD and VCC. The VCC level sets the input signal levels while VDD selects the output voltage levels.