Datasheet4U Logo Datasheet4U.com

N25S830HA - 256 kb Low Power Serial SRAMs

General Description

I A low level selects the device and a high level puts the device in standby mode.

high during a program cycle, the cycle will complete and then the device will enter standby mode.

Z.

Key Features

  • Power Supply Range: 2.7 to 3.6 V.
  • Very Low Standby Current: Typical Isb as low as 1 mA.
  • Very Low Operating Current: As low as 3 mA.
  • Simple Memory Control: Single chip select (CS) Serial input (SI) and serial output (SO).
  • Flexible Operating Modes: Word read and write Page mode (32 word page) Burst mode (full array).
  • Organization: 32 K x 8 bit.
  • Self Timed Write Cycles.
  • Built.
  • in Write Protection (CS High).
  • HOL.

📥 Download Datasheet

Datasheet Details

Part number N25S830HA
Manufacturer onsemi
File Size 91.56 KB
Description 256 kb Low Power Serial SRAMs
Datasheet download datasheet N25S830HA Datasheet

More Datasheets from onsemi

Part Number Description
N25S818HA 256 kb Low Power Serial SRAMs

Full PDF Text Transcription for N25S830HA (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for N25S830HA. For precise diagrams, tables, and layout, please refer to the original PDF.

View original datasheet text
N25S830HA 256 kb Low Power Serial SRAMs 32 k x 8 Bit Organization Introduction The ON Semiconductor serial SRAM family includes several integrated memory devices including this 256 kb serially accessed Static Random Access Memory, internally organized as 32 k words by 8 bits. The devices are designed and fabricated using ON Semiconductor’s advanced CMOS technology to provide both high−speed performance and low power. The devices operate with a single chip select (CS) input and use a simple Serial Peripheral Interface (SPI) serial bus. A single data in and data out line is used along with a clock to access data within the devices. The N25S830HA devices include a HOLD pin that allows communication to the device to be paused. While paused, input transitions will be ignored.