NCP1027 Datasheet | onsemi

High-Voltage Switcher for Medium Power Offline SMPS Featuring Low Standby Power The NCP1027 offers a new solution targeting output power levels from a few watts up to 15 W in a universal mains flyback application. Our proprietary high- voltage technology lets us include a power MOSFET together with a startup current source, all directly connected to the bulk capacitor. To prevent lethal runaway in low input voltage conditions, an adjustable brown- out circuitry blocks the activity until sufficient input level is reached. Current- mode operation together with an adjustable ramp pensation offers superior performance in universal mains applications. Furthermore, an Over Power Protection pin brings the ability to precisely pensate all internal delays in high input voltage conditions and optimize the maximum output current capability. Protection wise, a timer detects an overload or a short- circuit and stops all operations, ensuring a safe auto- recovery, low duty cycle burst operation. An integrated, auto- recovery, Overvoltage Protection permanently monitors the VCC level and temporarily shuts down the driving pulses in case of an unexpected feedback loop runaway. Finally, a great RDS(on) figure makes the circuit an excellent choice for standby/auxiliary offline power supplies or applications requiring higher output power levels. Features - Built- in 700 V MOSFET with Typical RDS(on) of 5.8 W, TJ = 25°C - Current- Mode Fixed Frequency Operation: 65 k Hz and 100 k Hz - Fixed Peak Current of 800 m A - Skip- Cycle Operation at Low Peak Currents - Internal Current Source for Clean and Lossless Startup Sequence - Auto- Recovery Output Short Circuit Protection with Timer- Based Detection - Auto- Recovery Overvoltage Protection with Auxiliary Winding Operation - Programmable Brown- Out Input for Low Input Voltage Detection - Programmable Over Power Protection - Input to Permanently Latchoff the Part - Internal Frequency Jittering for Improved EMI Signature - Extended Duty...