NCP431A
NCP431A is Programmable Precision References manufactured by onsemi.
DATA SHEET .onsemi.
Programmable Precision References
NCP431A, SC431A, NCP431B, SC431B, NCP432B, SC432B Series
The NCP431/NCP432 integrated circuits are three- terminal programmable shunt regulator diodes. These monolithic IC voltage references operate as a low temperature coefficient zener which is programmable from Vref to 36 V using two external resistors. These devices exhibit a wide operating current range of 40 m A to 100 m A with a typical dynamic impedance of 0.22 W. The characteristics of these references make them excellent replacements for zener diodes in many applications such as digital voltmeters, power supplies, and op amp circuitry. The 2.5 V reference makes it convenient to obtain a stable reference from 5.0 V logic supplies, and since the NCP431/ NCP432 operates as a shunt regulator, it can be used as either a positive or negative voltage reference. Low minimum operating current makes this device an ideal choice for secondary regulators in SMPS adapters with extremely low no- load consumption.
Features
- Programmable Output Voltage to 36 V
- Low Minimum Operating Current: 40 m A, Typ @ 25°C
- Voltage Reference Tolerance: ±0.5%, Typ @ 25°C
(NCP431B/NCP432B)
- Low Dynamic Output Impedance, 0.22 W Typical
- Sink Current Capability of 40 m A to 100 m A
- Equivalent Full- Range Temperature Coefficient of 50 ppm/°C
Typical
- Temperature pensated for Operation over Full Rated Operating
Temperature Range
- SC Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AEC- Q100 Qualified and PPAP Capable
- These are Pb- Free Devices
Typical Applications
- Voltage Adapters
- Switching Power Supply
- Precision Voltage Reference
- Charger
- Instrumentation
Pin 1. Reference
2. Anode 3. Cathode
STRAIGHT LEAD BULK PACK
1 2 3
BENT LEAD TAPE & REEL AMMO PACK
TO- 92 LP SUFFIX CASE 29-...
