NCP436
NCP436 is 3A Ultra-Small Controlled Load Switch manufactured by onsemi.
NCP436, NCP437
3A Ultra-Small Controlled Load Switch with Auto-Discharge Path
The NCP436 and NCP437 are very low Ron MOSFET controlled by external logic pin, allowing optimization of battery life, and portable device autonomy.
Indeed, due to a current consumption optimization with PMOS structure, leakage currents are eliminated by isolating connected IC on the battery when not used.
Output discharge path is also embedded to eliminate residual voltages on the output rail for the NCP437 part only.
Proposed in a wide input voltage range from 1.0 V to 3.6 V, in a small 1 x 1.5 mm WLCSP6, pitch 0.5 mm.
Features
- 1.0 V
- 3.6 V Operating Range
- 20 m W P MOSFET at 3.6 V
- DC Current Up to 3 A
- Output Auto- discharge
- Active High EN Pin
- WLCSP6 1 x 1.5 mm
- These are Pb- Free Devices
Typical Applications
- Mobile Phones
- Tablets
- Digital Cameras
- GPS
- Portable Devices http://onsemi.
MARKING DIAGRAM
WLCSP6 CASE 567FH
XXX AYW
A = Assembly Location Y = Year W = Work Week G = Pb- Free Package
PIN DIAGRAM
A OUT
B OUT
C GND
(Top...
