Datasheet4U Logo Datasheet4U.com

NCV7380 - LIN Transceiver

General Description

Description Receive data from BUS to microprocessor, LOW in dominant state.

No connection.

5.0 V supply input.

Key Features

  • Operating Voltage VS = 7.0 to 18 V.
  • Low Current Consumption of Typ. 24 mA.
  • LIN.
  • Bus Transceiver:.
  • Slew Rate Control for Good EMC Behavior.
  • Fully Integrated Receiver Filter.
  • BUS Input Voltage.
  • 27 V to 40 V.
  • Integrated Termination Resistor for LIN Slave Nodes (30 kW).
  • Baud Rate up to 20 kBaud.
  • Will Work in Systems Designed for either LIN 1.3 or LIN 2.0.
  • Compatible to ISO9141 Functions.

📥 Download Datasheet

Datasheet Details

Part number NCV7380
Manufacturer onsemi
File Size 193.53 KB
Description LIN Transceiver
Datasheet download datasheet NCV7380 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCV7383 Transceiver ON Semiconducto
NCV70628 Micro-stepping Motor Driver onsemi
NCV7410 Automotive Ethernet Transceiver onsemi
NCV7424 Four Channel LIN Transceiver ON Semiconducto
NCV7518 Hex Low side MOSFET Pre driver ON Semiconducto

Other Datasheets by onsemi

Part Number Description
NCV7381 FlexRay Bus Driver
NCV7382 Enhanced LIN Transceiver
NCV7321 Stand Alone LIN Transceiver
NCV7340 High Speed Low Power CAN Transceiver
NCV7341 High Speed Low Power CAN Transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NCV7380 LIN Transceiver The NCV7380 is a physical layer device for a single wire data link capable of operating in applications where high data rate is not required and a lower data rate can achieve cost reductions in both the physical media components and in the microprocessor which uses the network. The NCV7380 is designed to work in systems developed for LIN 1.3 or LIN 2.0. The IC furthermore can be used in ISO9141 systems. Because of the very low current consumption of the NCV7380 in recessive state, it’s suitable for ECU applications with low standby current requirements, whereby no sleep/wakeup control from the microprocessor is necessary. Features • Operating Voltage VS = 7.0 to 18 V • Low Current Consumption of Typ.