Datasheet4U Logo Datasheet4U.com

NCV7382 - Enhanced LIN Transceiver

Description

Description Receive data from BUS to microprocessor, LOW in dominant state.

Enables the normal operation mode when HIGH.

5.0 V supply input.

Features

  • ăOperating Voltage VS = 7.0 to 18 V.
  • ăVery Low Standby Current Consumption of Typ. 6.5 mA in Sleep Mode.
  • ăLIN-Bus Transceiver:.
  • ăSlew Rate Control for Good EMC Behavior.
  • ăFully Integrated Receiver Filter.
  • ăBUS Input Voltage -27 V to 40 V.
  • ăIntegrated Termination Resistor for LIN Slave Nodes (30 kW).
  • ăWakeup Via LIN Bus.
  • ăBaud Rate up to 20 kBaud.
  • ăWill Work in Systems Designed for Either LIN 1.3 or LIN 2.0.

📥 Download Datasheet

Datasheet preview – NCV7382

Datasheet Details

Part number NCV7382
Manufacturer ON Semiconductor
File Size 149.52 KB
Description Enhanced LIN Transceiver
Datasheet download datasheet NCV7382 Datasheet
Additional preview pages of the NCV7382 datasheet.

📁 Similar Datasheet

  • NCV7383 - Transceiver (ON Semiconducto)
  • NCV70628 - Micro-stepping Motor Driver (onsemi)
  • NCV7410 - Automotive Ethernet Transceiver (onsemi)
  • NCV7424 - Four Channel LIN Transceiver (ON Semiconducto)
  • NCV7518 - Hex Low side MOSFET Pre driver (ON Semiconducto)
  • NCV7719 - Octal Half-Bridge Driver (ON Semiconducto)
  • NCV78514 - 1-Channel Automotive LED Driver (onsemi)
  • NCV78902 - High Efficiency 2 Phase Booster LED Driver (onsemi)
  • NCV2902 - Single Supply Quad Operational Amplifiers (ON)
  • NCV3025833 - Smart Power Stage (onsemi)
Other Datasheets by ON Semiconductor
  • NCV7380 - LIN Transceiver
  • NCV7381 - FlexRay Bus Driver
  • NCV7321 - Stand Alone LIN Transceiver
  • NCV7340 - High Speed Low Power CAN Transceiver
  • NCV7341 - High Speed Low Power CAN Transceiver
  • NCV7342 - High Speed Low Power CAN Transceiver
  • NCV7343 - CAN FD Transceiver
  • NCV7344 - CAN FD Transceiver

Full PDF Text Transcription

Click to expand full text
NCV7382 Enhanced LIN Transceiver The NCV7382 is a physical layer device for a single wire data link capable of operating in applications where high data rate is not required and a lower data rate can achieve cost reductions in both the physical media components and in the microprocessor which uses the network. The NCV7382 is designed to work in systems developed for LIN 1.3 or LIN 2.0. The IC furthermore can be used in ISO9141 systems. Because of the very low current consumption of the NCV7382 in the sleep mode it's suitable for ECU applications with low standby current requirements. This mode allows a shutdown of the whole application. The included wakeup function detects incoming dominant bus messages and enables the voltage regulator. Features •ăOperating Voltage VS = 7.
Published: |