Datasheet4U Logo Datasheet4U.com

NCV7517B - Hex Low-Side MOSFET Pre-Driver

Datasheet Summary

Features

  • programmable fault management modes and allows power.
  • limiting PWM operation with programmable refresh time. The device offers 3.3 V/5.0 V compatible inputs and the serial output driver can be powered from either 3.3 V or 5.0 V. Power.
  • on reset provides controlled powerup and two enable inputs allow all outputs to be simultaneously disabled. Each channel independently monitors its external MOSFET’s drain voltage for fault conditions. Shorted load fault detection thresholds are full.

📥 Download Datasheet

Datasheet preview – NCV7517B

Datasheet Details

Part number NCV7517B
Manufacturer ON Semiconductor
File Size 188.73 KB
Description Hex Low-Side MOSFET Pre-Driver
Datasheet download datasheet NCV7517B Datasheet
Additional preview pages of the NCV7517B datasheet.

📁 Similar Datasheet

  • NCV7518 - Hex Low side MOSFET Pre driver (ON Semiconducto)
  • NCV70628 - Micro-stepping Motor Driver (onsemi)
  • NCV7383 - Transceiver (ON Semiconducto)
  • NCV7410 - Automotive Ethernet Transceiver (onsemi)
  • NCV7424 - Four Channel LIN Transceiver (ON Semiconducto)
  • NCV7719 - Octal Half-Bridge Driver (ON Semiconducto)
  • NCV78514 - 1-Channel Automotive LED Driver (onsemi)
  • NCV78902 - High Efficiency 2 Phase Booster LED Driver (onsemi)
  • NCV2902 - Single Supply Quad Operational Amplifiers (ON)
  • NCV3025833 - Smart Power Stage (onsemi)
Other Datasheets by ON Semiconductor
  • NCV7517 - Hex Low-Side MOSFET Pre-Driver
  • NCV7510 - FlexMOS Programmable Peak and Hold PWM MOSFET Predriver
  • NCV7512 - Quad Low-Side Pre-driver
  • NCV7513 - Hex Low Side MOSFET Pre-Driver
  • NCV7513B - Hex Low-Side MOSFET Pre-Driver
  • NCV7518A - Hex Low side MOSFET Pre driver
  • NCV7519 - Hex Low-side MOSFET Pre-driver
  • NCV7519A - Hex Low-side MOSFET Pre-driver

Full PDF Text Transcription

Click to expand full text
NCV7517B FLEXMOSt Hex Low-Side MOSFET Pre-Driver The NCV7517B programmable six channel low−side MOSFET pre−driver is one of a family of FLEXMOSTM automotive grade products for driving logic−level MOSFETs. The product is controllable by a combination of serial SPI and parallel inputs. It features programmable fault management modes and allows power−limiting PWM operation with programmable refresh time. The device offers 3.3 V/5.0 V compatible inputs and the serial output driver can be powered from either 3.3 V or 5.0 V. Power−on reset provides controlled powerup and two enable inputs allow all outputs to be simultaneously disabled. Each channel independently monitors its external MOSFET’s drain voltage for fault conditions.
Published: |