NCV760040 Datasheet | onsemi

Quad High-side Driver The NCV760040 is an automotive grade integrated driver with four high- side switches. The device Features per- channel adjustable current limit and is protected for overtemperature conditions. Output control and diagnostic reporting is performed via I2C bus. Current sense data is provided through I2C in addition to a multiplexed analog current sense output pin. The NCV760040 is available in a QFNW20 3.5 x 3.5 mm step- cut package with wettable flanks and Features an exposed pad for optimal thermal performance. Features - 4 High- side Channels - 1.2 A Peak Current Per Channel - RDS(ON) = 500 m W Typical, 1.0 W Max - Global Enable Pin - Low Quiescent Current in Sleep Mode - Status Reporting via I2C and via Open- drain Fault Pin - Current Sense Readout via I2C and via CS Pin - Baseline Current Limit Set via External Resistor with Per- channel Current Limit Shift via I2C - Overtemperature Shutdown - Short to Battery Protection with Per- channel Reverse Current Blocking - Open Load Detection - Loss of Ground Protection - NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC- Q100 Qualified and PPAP Capable - These Devices are Pb- Free, Halogen Free/BFR Free and are Ro HS pliant Applications - Camera Switch - LEDs, Sensors - Advanced Driver Assistance Systems (ADAS) - Infotainment - Power Over Coax (Po C) DATA SHEET .onsemi. QFNW20 3.5x3.5, 0.5P CASE 484AV MARKING DIAGRAM NCV 760040 AWLYWW NCV760040 = Specific Device Code A = Assembly Location WL = Wafer Lot Y = Year WW = Work...