NCV7608 Datasheet | onsemi

Octal Configurable Low/High Side Driver The NCV7608 integrates 8 output drivers configurable in any bination of high- side, low- side, or H- Bridge configurations. The integrated standard Serial Peripheral Interface (SPI) allows digital control of all output stages and provides diagnostic fault information. In addition, four channels (#5- 8) can be PWM controlled via external control input pins. Integrated clamping circuits (both in high and low- side operational modes), waveshaping, positive and negative transient protection, and dedicated channel pair overtemperature shutdown circuits provide for a wide range of automotive and industrial applications. Features - Eight Independent Configurable Drivers - RDS(on) = 1.2 W (typ @25°C) - SPI Interface for Data munication - 16 Bit Frame Length, Daisy Chain patible - 3.3 V/5 V patible - Frame Detection - PWM Inputs for 4 Outputs - Ultra- low Standby Current - Over Current Protection - Characterized to AEC Q10X- 12- REV A - High- Side and Low- Side Flyback Protection - Fault Repoting - Undervoltage Lockout (VS and VCC) - Overvoltage Shutdown (VS) - Supports LED Loads - Supports Cold Cranking Operation Down to 3 V - Overtemperature Protection - NCV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC- Q100 Qualified and PPAP Capable - These are Pb- Free Devices Typical Applications - Automotive - Industrial - Relay Drive - DC Motor...