Datasheet4U Logo Datasheet4U.com

NCV7692 - Current Controller

General Description

Logic input for output on/off control.

Pull high for output on.

A capacitor to ground sets the time for open circuit, short circuit, and overtemperature detection.

Key Features

  • Constant Current Output for LED String Drive.
  • External Bipolar Device for Wide Current Range Flexibility.
  • With BCP56 Transistor, Can Drive Multiple Strings Concurrently (ref. Datasheet Info).
  • External Programming Current Resistor.
  • Pulse Width Modulation (PWM) Control.
  • Negative Temperature Coefficient Current Control Option.
  • Open LED String Diagnostic.
  • Short.
  • Circuit LED String Diagnostic.
  • Multiple LED String.

📥 Download Datasheet

Datasheet Details

Part number NCV7692
Manufacturer onsemi
File Size 231.83 KB
Description Current Controller
Datasheet download datasheet NCV7692 Datasheet

More Datasheets from onsemi

Part Number Description
NCV7691 Current Controller
NCV7693 Automotive LED Controller
NCV7694 Safety Controller
NCV760040 Quad High-side Driver
NCV7601 Quad Driver
NCV7608 Octal Configurable Low/High Side Driver
NCV7680 Linear Current Regulator/Controller
NCV7681 100mA Linear Current Regulator/Controller
NCV7683 Enhanced 100mA Linear Current Regulator/Controller
NCV7685 12 Channels 60mA LED Current Driver

Full PDF Text Transcription for NCV7692 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for NCV7692. For precise diagrams, tables, and layout, please refer to the original PDF.

View original datasheet text
NCV7692 Current Controller for Automotive LED Lamps The NCV7692 is a device which uses an external NPN bipolar device combined with feedback resistor(s) to regulate a current for use in driving LEDs. The target application for this device is automotive rear combination lamps. A single driver gives the user flexibility to add single channels to multichannel systems. A dedicated dimming feature is included via the PWM input pin. The individual driver is turned off when an open load or short circuit is detected. LED brightness levels are easily programmed using an external resistor in series with the bipolar transistor. The use of the resistor gives the user the flexibility to use the device over a wide range of currents. Multiple strings of LEDs can be operated with a single NCV7692 device.