Datasheet4U Logo Datasheet4U.com

NCV7693 - Automotive LED Controller

Description

TSSOP

Logic input1 for output SW1 on / off control and diagnostic feedback.

Pull high for output on.

Features

  • 3x Pulse Width Modulation (PWM) Control.
  • Independent Diagnostic Feedback per Function.
  • External Switching Device for Wide Current Range Flexibility.
  • External Resistors Define Maximum Current.
  • Open LED String Diagnostic.
  • Short.
  • Circuit LED String Diagnostic.
  • Thermal Shut.
  • down Diagnostic and Protection.
  • Protection against Short.
  • Circuit on the PWM Input Pins.
  • Multiple LED String Control.

📥 Download Datasheet

Datasheet preview – NCV7693

Datasheet Details

Part number NCV7693
Manufacturer ON Semiconductor
File Size 256.86 KB
Description Automotive LED Controller
Datasheet download datasheet NCV7693 Datasheet
Additional preview pages of the NCV7693 datasheet.

📁 Similar Datasheet

  • NCV70628 - Micro-stepping Motor Driver (onsemi)
  • NCV7383 - Transceiver (ON Semiconducto)
  • NCV7410 - Automotive Ethernet Transceiver (onsemi)
  • NCV7424 - Four Channel LIN Transceiver (ON Semiconducto)
  • NCV7518 - Hex Low side MOSFET Pre driver (ON Semiconducto)
  • NCV7719 - Octal Half-Bridge Driver (ON Semiconducto)
  • NCV78514 - 1-Channel Automotive LED Driver (onsemi)
  • NCV78902 - High Efficiency 2 Phase Booster LED Driver (onsemi)
  • NCV2902 - Single Supply Quad Operational Amplifiers (ON)
  • NCV3025833 - Smart Power Stage (onsemi)
Other Datasheets by ON Semiconductor
  • NCV7691 - Current Controller
  • NCV7692 - Current Controller
  • NCV7694 - Safety Controller
  • NCV760040 - Quad High-side Driver
  • NCV7601 - Quad Driver
  • NCV7608 - Octal Configurable Low/High Side Driver
  • NCV7680 - Linear Current Regulator/Controller
  • NCV7681 - 100mA Linear Current Regulator/Controller

Full PDF Text Transcription

Click to expand full text
Controller for Automotive LED Lamps NCV7693 The NCV7693 is a device which drives multiple external switching components for 3 independent functions. The average current in each LED string can be regulated with a proper choice of duty−cycle and battery voltage. The target application for this device is automotive rear combination lamps. Each individual driver has its own diagnostic to detect open load, short circuit to ground or to battery. LED average brightness levels are easily programmed using appropriate duty cycle control and external resistors in series with the switching transistors. Multiple strings of LEDs can be operated with a single NCV7693 device. The device is available in a TSSOP−14 package.
Published: |