Datasheet4U Logo Datasheet4U.com

NCV81071 - Dual 5A High Speed Low-Side MOSFET Drivers

General Description

Pin No.

Enable input for the driver channel A with logic compatible threshold and hysteresis.

able and disable the driver output.

Key Features

  • High Current Drive Capability ±5 A.
  • TTL/CMOS Compatible Inputs Independent of Supply Voltage.
  • Industry Standard Pin.
  • out.
  • Enable Functions for Each Driver.
  • 8 ns Typical Rise and 8 ns Typical Fall Times with 1.8 nF Load.
  • Typical Propagation Delay Times of 20 ns with Input Falling and 20 ns with Input Rising.
  • Input Voltage from 4.5 V to 20 V.
  • Dual Outputs can be Paralleled for Higher Drive Current.
  • Fully Speci.

📥 Download Datasheet

Datasheet Details

Part number NCV81071
Manufacturer onsemi
File Size 333.64 KB
Description Dual 5A High Speed Low-Side MOSFET Drivers
Datasheet download datasheet NCV81071 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NCV8501 LDO Linear Regulators ON
NCV8502 LDO Linear Regulators ON
NCV896530 Buck Converter ON Semiconducto
NCV2902 Single Supply Quad Operational Amplifiers ON
NCV3025833 Smart Power Stage onsemi

Other Datasheets by onsemi

Part Number Description
NCV8114 CMOS Low Dropout Voltage Regulator
NCV8130 Very Low Dropout Bias Rail CMOS Voltage Regulator
NCV8133 Very Low Dropout Bias Rail CMOS Voltage Regulator
NCV81341 Automotive Dual DrMOS
NCV81341P Automotive Dual DrMOS

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Dual 5 A High Speed Low-Side MOSFET Drivers with Enable NCV81071 NCV81071 is a high speed dual low−side MOSFETs driver. It is capable of providing large peak currents into capacitive loads. This driver can deliver 5 A peak current at the Miller plateau region to help reduce the Miller effect during MOSFETs switching transition. This driver also provides enable functions to give users better control capability in different applications. ENA and ENB are implemented on pin 1 and pin 8 which were previously unused in the industry standard pin−out. They are internally pulled up to driver’s input voltage for active high logic and can be left open for standard operations.