NCV8504 Datasheet | onsemi

NCV8504 Series LDO Linear Regulators Micropower, DELAY, Adjustable RESET, General Use parator 400 m A The NCV8504 is a family of precision micropower voltage regulators. Their output current capability is 400 m A. The family has output voltage options for Adjustable, 2.5 V, 3.3 V and 5.0 V. The output voltage is accurate within ± 2.0% with a maximum dropout voltage of 0.6 V at 400 m A. Low quiescent current is a feature drawing only 100 μA with a 100 μA load. This part is ideal for any and all battery operated microprocessor equipment. Microprocessor control logic includes an active RESET (with DELAY). The active RESET circuit operates correctly at an output voltage as low as 1.0 V. The RESET function is activated during the power up sequence or during normal operation if the output voltage drops below the regulation limits. The reset threshold voltage can be decreased by the connection of external resistor divider to RADJ lead. The general use parator (FLAG/Monitor) is referenced to a temperature stable voltage and provides 1 m A of drive current at its open collector output. The regulator is protected against reverse battery, short circuit, and thermal overload conditions. The device can withstand load dump transients making it suitable for use in automotive environments. The device has also been optimized for EMC conditions. Features - Output Voltage Options: Adjustable, 2.5 V, 3.3 V, 5.0 V - ± 2.0% Output - Low 100 μA Quiescent Current - Fixed or Adjustable Output Voltage - Active RESET - Adjustable Reset - 400 m A Output Current Capability - Fault Protection - +60 V Peak Transient Voltage - - 15 V Reverse Voltage - Short Circuit - Thermal Overload - General Use parator - NCV Prefix for Automotive and Other Applications Requiring Site and Change Control - AEC Qualified - PPAP Capable - These are Pb- Free Devices http://onsemi. SOIC 16 LEAD WIDE BODY EXPOSED PAD PDW SUFFIX CASE...