NCV8505 Datasheet | onsemi

NCV8505 Series LDO Linear Regulators Micropower, ENABLE, DELAY, RESET 400 m A The NCV8505 is a family of precision micropower voltage regulators. Their output current capability is 400 m A. The family has output voltage options for Adjustable, 2.5 V, 3.3 V and 5.0 V. The output voltage is accurate within ± 2.0% with a maximum dropout voltage of 0.6 V at 400 m A. Low quiescent current is a feature drawing less than 1.0 m A with ENABLE = 0 V. With ENABLE = 5.0 V, the part only draws 200 m A with 100 m A load. This part is ideal for any and all battery operated microprocessor equipment. Microprocessor control logic includes an active RESET (with DELAY). The active RESET circuit operates correctly at an output voltage as low as 1.0 V. The RESET function is activated during the power up sequence or during normal operation if the output voltage drops below the regulation limits. The regulator is protected against reverse battery, short circuit, and thermal overload conditions. The device can withstand load dump transients making it suitable for use in automotive environments. The device has also been optimized for EMC conditions. Features - Output Voltage Options: Adjustable, 2.5 V, 3.3 V, 5.0 V - ± 2.0% Output - Low < 1.0 m A Sleep Current - Low 200 m A Quiescent Current - Fixed or Adjustable Output Voltage - Active RESET - ENABLE - 400 m A Output Current Capability - Fault Protection - +60 V Peak Transient Voltage - - 15 V Reverse Voltage - Short Circuit - Thermal Overload - NCV Prefix for Automotive and Other Applications Requiring Site and Change Control - AEC Qualified - PPAP Capable - These are Pb- Free Devices http://onsemi. MARKING DIAGRAM D2PAK- 7 DPS SUFFIX CASE 936AB NC V8505x AWLYWWG 1 x = Voltage Ratings as Indicated Below: A = Adjustable 2 = 2.5 V 3 = 3.3 V 5 = 5.0...