Datasheet4U Logo Datasheet4U.com

NCV8512 - LDO Linear Regulator

Datasheet Summary

Features

  • 5.0 V ± 2.0% Output.
  • Low 130 mA Quiescent Current.
  • Active RESET.
  • Adjustable Reset.
  • 150 mA Output Current Capability.
  • Fault Protection.
  • +60 V Peak Transient Voltage.
  • 15 V Reverse Voltage.
  • Short Circuit.
  • Thermal Overload.
  • Early Warning through FLAG/MON Leads.
  • Thermally Enhanced in SOW.
  • 16 Exposed Pad.
  • NCV Prefix for Automotive and Other.

📥 Download Datasheet

Datasheet preview – NCV8512

Datasheet Details

Part number NCV8512
Manufacturer ON Semiconductor
File Size 141.84 KB
Description LDO Linear Regulator
Datasheet download datasheet NCV8512 Datasheet
Additional preview pages of the NCV8512 datasheet.

📁 Similar Datasheet

  • NCV8501 - LDO Linear Regulators (ON)
  • NCV8502 - LDO Linear Regulators (ON)
  • NCV8184 - Tracking Regulator/Line Driver (ON)
  • NCV896530 - Buck Converter (ON Semiconducto)
  • NCV2902 - Single Supply Quad Operational Amplifiers (ON)
  • NCV3025833 - Smart Power Stage (onsemi)
  • NCV4279 - 5.0V Micropower 150mA LDO Linear Regulator (ON)
  • NCV51153 - 4.5-A/9-A Isolated Single Channel Gate Driver (onsemi)
  • NCV51563 - 4.5-A/9-A Isolated Dual Channel Gate Driver (onsemi)
  • NCV551 - Low-Dropout Voltage Regulator (ON)
Other Datasheets by ON Semiconductor

Full PDF Text Transcription

Click to expand full text
NCV8512 5.0 V Micropower 150 mA LDO Linear Regulator with DELAY, Adjustable RESET, and Monitor FLAG The NCV8512 is a 5.0 V precision micropower voltage regulator. The output current capability is 150 mA. The output voltage is accurate within ±2.0% with a maximum dropout voltage of 0.6 V at 150 mA. Low quiescent current is a feature drawing only 130 mA with a 100 mA load. This part is ideal for any and all battery operated microprocessor equipment. Microprocessor control logic includes an active RESET (with DELAY), and a FLAG monitor which can be used to provide an early warning signal to the microprocessor of a potential impending RESET signal. The use of the FLAG monitor allows the microprocessor to finish any signal processing before the RESET shuts the microprocessor down.
Published: |