NCV8800
NCV8800 is Synchronous Buck Regulator manufactured by onsemi.
NCV8800 Series
Synchronous Buck Regulator with 1.0 Amp Switch
The NCV8800 is an automotive synchronous step--down buck regulator. This part provides an efficient step--down voltage pared to linear regulators. The NCV8800 uses very few external ponents allowing for maximum use of printed circuit board space.
Features
- Output Voltage Options: 2.6 V, 3.3 V, 5.0 V, 7.5 V
- ±3.0% Output
- 3.5 V Operation
- AUXILIARY Hold Up Pin (for Cranking Conditions)
- On--Chip Switching Power Devices (0.4 Ω RDS(ON))
- Constant Frequency
- Synchronous Operation
- On--Chip Charge Pump Control Circuitry
- Nonoverlap Logic
- Power Up Sequencing Control Option (2.6 V and 3.3 V Only)
- ENABLE Battery Voltage Capable Option
- Selectable Reset Delay
- Dual Pin Feedback Connection
- V2™ Control Topology
- Internally Fused Leads in SO--16L Package
- NCV Prefix for Automotive and Other Applications Requiring Site and Change Control
- These devices are available in Pb--free package(s). Specifications herein apply to both standard and Pb--free devices. Please see our website at .onsemi. for specific Pb--free orderable part numbers, or contact your local ON Semiconductor sales office or representative. Typical Applications
- Telemunications
- Mobile Multimedia
- Instrumentation
- Automotive Entertainment Systems http://onsemi.
16 1
SO--16L DW SUFFIX CASE 751G
PIN CONNECTIONS AND MARKING DIAGRAM
1 AUXILIARY
ENABLE RESET GND GND...
