NCV8876 - Automotive Grade Start-Stop Non-Synchronous Boost Controller

Product Overview

ON Semiconductor

Datasheet Details

Part number	NCV8876
Manufacturer	ON Semiconductor
File Size	278.61 KB
Description	Automotive Grade Start-Stop Non-Synchronous Boost Controller
Datasheet	NCV8876 Datasheet
Additional preview pages of the NCV8876 datasheet.

Product details

Description

Pin No. drain diagnostic. up resistor of around 80 kW should be connected between STATUS and a microcontroller reference.This output is a logic high when the IC is disabled or in UVLO.2 ISNS Current sense input.Connect this pin to the source of the external N MOSFET, through a current sen

Features

include, cycle-by-cycle current limiting, protection and thermal shutdown. Additional features include low quiescent current sleep mode operation. The NCV8876 is enabled when the supply voltage drops below 7.3 V, with boost operation initiated when the supply voltage is below 6.8 V. Features.
Automatic Enable Below 7.3 V (Factory Programmable).
Boost Mode Operation at 6.8 V.
$2% Output Accuracy Over Temperature Range.
Peak Current Mode Control with Internal Sl.

📁 Similar Datasheet

NCV8184 - Tracking Regulator/Line Driver (ON)
NCV8501 - LDO Linear Regulators (ON)
NCV8502 - LDO Linear Regulators (ON)
NCV896530 - Buck Converter (ON Semiconducto)
NCV2902 - Single Supply Quad Operational Amplifiers (ON)
NCV3025833 - Smart Power Stage (onsemi)
NCV4279 - 5.0V Micropower 150mA LDO Linear Regulator (ON)
NCV51153 - 4.5-A/9-A Isolated Single Channel Gate Driver (onsemi)

Other Datasheets by ON Semiconductor

NCV8870 - Automotive Grade Non-Synchronous Boost Controller
NCV8871 - Automotive Grade Non-Synchronous Boost Controller
NCV887200 - Automotive Grade Non-Synchronous Boost Controller
NCV8873 - Automotive Grade Non-Synchronous Boost Controller
NCV8877 - Automotive Grade Start-Stop Non-Synchronous Boost Controller
NCV8878 - Automotive Grade Start-Stop Non-Synchronous Boost Controller

Published: Jun 29, 2013 |