NFVA23512NP2T Datasheet | onsemi

ASPM34 Series Automotive 3- Phase 1200 V, 35 A IGBT Intelligent Power Module General Description NFVA23512NP2T is an advanced Auto IPM module providing a fully- featured, high- performance inverter output stage for hybrid and electric vehicles. These modules integrate optimized gate drive of the built- in IGBTs to minimize EMI and losses, while also providing multiple on- module protection Features including under- voltage lockouts, over- current shutdown, thermal monitoring of drive IC, and fault reporting. The built- in, high- speed HVIC requires only a single supply voltage and translates the ining logic- level gate inputs to the high- voltage, high- current drive signals required to properly drive the module’s internal IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms. Features - Automotive SPM® in 34 pin DIP package - AEC & AQG324 Qualified and PPAP Capable - 1200 V - 35 A 3- Phase IGBT Inverter with Integral Gate Drivers and Protection - Low- Loss, Short- Circuit Rated IGBTs - Very Low Thermal Resistance using Al2O3 DBC Substrate - Built- In Bootstrap Diodes and Dedicated Vs Pins Simplify PCB Layout - Separate Open- Emitter Pins from Low- Side IGBTs for Three- Phase Current Sensing - Single- Grounded Power Supply Supported - Built- In NTC Thermistor for Temperature Monitoring and Management - Adjustable Over- Current Protection via Integrated Sense- IGBTs - Isolation Rating of 2500 Vrms/1 min - This is a Pb- Free Device Applications - Automotive High Voltage Auxiliary Motors - Climate e- pressors - Oil/Water Pumps - Super/Turbo Chargers - Variety Fans - Motion Control - Industrial Motor Related Resources - AN-...