NFVA35065L42 Datasheet | onsemi

DATA SHEET .onsemi. ASPM 27 Series Automotive 3- Phase 650 V 50 A Smart Power Module General Description NFVA35065L42 is an advanced Automotive SPM® module providing a fully- featured, high- performance inverter output stage for hybrid and electric vehicles. These modules integrate optimized gate drive of the built- in IGBTs to minimize EMI and losses, while also providing multiple on- module protection Features including under- voltage lockouts, over- current shutdown, thermal monitoring of drive IC, and fault reporting. The built- in, high- speed HVIC requires only a single supply voltage and translates the ining logic- level gate inputs to the high- voltage, high- current drive signals required to properly drive the module’s internal IGBTs. Separate negative IGBT terminals are available for each phase to support the widest variety of control algorithms. Features - Automotive SPM in 27 Pin DIP Package - AEC & AQG324 Qualified and PPAP Capable - 650 V/50 A 3- Phase IGBT Inverter with Integral Gate Drivers and Protections - 175°C Guaranteed Short- Circuit Rated FS Trench IGBTs with Low Vce(sat) and Fast Switching - Outstanding Thermal Resistance Using Al2O3 DBC Substrate - Separated Open- Emitter Pins from Low- Side IGBTs for Three- Phase Current Sensing - Single- Grounded Power Supply - LVIC Temperature- Sensing Built- In for Temperature Monitoring - Isolation Rating: 2500 Vrms/1 min. - Pb- Free and Ro HS pliant - UI1557 Certified (File No. E209204) and UL94V- 0 pliant Applications - Automotive High Voltage Auxiliary Motors - Climate e- pressors - Oil / Water Pumps - Super / Turbo Chargers - Variety Fans Related Resources - AND9800 - Automotive Smart Power Module, 650 V ASPM27 Series - AN- 9086 - SPM 3 Package Mounting...