Datasheet4U Logo Datasheet4U.com

NLSX4014 - Translator

General Description

VCC Input Voltage VL Input Voltage Ground Output Enable I/O Port, Referenced to VCC I/O Port, Referenced to VL FUNCTION TABLE EN L H Operating Mode Hi Z I/O Buses Connected http://onsemi.com 2 Free Datasheet http://www.datasheet4u.com/ NLSX4014 VL +1.8V +3.6V P One Shot 4 kW VCC

Key Features

  • http://onsemi. com.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
NLS-EM2027 2D Barcode Scan Engine Integration Guide Newland
NLSG06S01 GREEN STANDARD LED NICHIA CORPORATION
NLSL06S01A WARM NICHIA CORPORATION
NLSR06S01 RED STANDARD LED NICHIA CORPORATION

Other Datasheets by onsemi

Part Number Description
NLSX4302E Translator
NLSX4373 Translator
NLSX4378 Translator
NLSX4378A 4-Bit 24 Mb/s Dual-Supply Level Translator
NLSX4401 1-Bit 20 Mb/s Dual-Supply Level Translator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
NLSX4014 4-Bit 100 Mb/s Configurable Dual-Supply Level Translator The NLSX4014 is a 4−bit configurable dual−supply bidirectional level translator without a direction control pin. The I/O VCC− and I/O VL−ports are designed to track two different power supply rails, VCC and VL respectively. The VCC supply rail is configurable from 1.3 V to 4.5 V while the VL supply rail is configurable from 0.9 V to (VCC − 0.4) V. This allows lower voltage logic signals on the VL side to be translated into higher voltage logic signals on the VCC side, and vice−versa. Both I/O ports are auto−sensing; thus, no direction pin is required. The Output Enable (EN) input, when Low, disables both I/O ports by putting them in 3−state. This significantly reduces the supply currents from both VCC and VL.