Datasheet4U Logo Datasheet4U.com

NV25320LV - EEPROM

This page provides the datasheet information for the NV25320LV, a member of the NV25080LV EEPROM family.

Datasheet Summary

Description

NV25080LV, NV25160LV, NV25320LV, NV25640LV are a EEPROM Serial 8/16/32/64

Kb SPI Low Voltage Automotive Grade 1 devices internally organized as 1K/2K/4K/8Kx8 bits.

Features

  • a 32 byte page write buffer and supports the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the NV25xxx device. The device features software and hardware write protection, including partial as well as full array protection. Byte Level On.
  • Chip ECC (Error Correction Cod.

📥 Download Datasheet

Datasheet preview – NV25320LV

Datasheet Details

Part number NV25320LV
Manufacturer ON Semiconductor
File Size 139.00 KB
Description EEPROM
Datasheet download datasheet NV25320LV Datasheet
Additional preview pages of the NV25320LV datasheet.

📁 Similar Datasheet

  • NV20FP - G-LOW CURRENT HIGH VOLTAGE RECTIFIERS (HV Component Associates)
  • NV231 - light weight (DB Lectro)
  • NV2M - light weight (DB Lectro)
Other Datasheets by ON Semiconductor

Full PDF Text Transcription

Click to expand full text
DATA SHEET www.onsemi.com EEPROM Serial 8/16/32/64-Kb SPI Low Voltage Automotive Grade 1 SOIC−8 DW SUFFIX CASE 751BD TSSOP−8 DT SUFFIX CASE 948AL 1 UDFN8 MUW3 SUFFIX CASE 517DH NV25080LV, NV25160LV, NV25320LV, NV25640LV Description NV25080LV, NV25160LV, NV25320LV, NV25640LV are a EEPROM Serial 8/16/32/64−Kb SPI Low Voltage Automotive Grade 1 devices internally organized as 1K/2K/4K/8Kx8 bits. It features a 32 byte page write buffer and supports the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the NV25xxx device.
Published: |