CAT5419
Overview
The CAT5419 is two digital POTs integrated with control logic and 16 bytes of NVRAM memory. A separate 6-bit control register (WCR) independently controls the wiper tap position for each digital POT.
- Two Linear-taper Digital Potentiometers
- 64 Resistor Taps per Potentiometer
- End to End Resistance 2.5 kW, 10 kW, 50 kW or 100 kW
- Potentiometer Control and Memory Access via 2-wire Interface (I2C like)
- Low Wiper Resistance, Typically 80 W
- Four Non-volatile Wiper Settings for Each Potentiometer
- Recall of Wiper Settings at Power Up
- 2.5 to 6.0 Volt Operation
- Standby Current less than 1 mA
- 1,000,000 Nonvolatile WRITE Cycles
