Datasheet4U Logo Datasheet4U.com

OCP8172 - One-Channel High Power LED Controller

General Description

The OCP8172 is a high power LED driver, non-synchronous boost controller.

The OCP8172 can be used for the LED backlight in LCD panels.

It is designed for current mode control power converters that require a single drive output, such as boost LED driver and SEPIC topologies.

Key Features

  • include programmable oscillator frequency, power MOSFET over-current protection (OCP), over-voltage protection (OVP), under-voltage lock-out (UVLO), output to ground short-circuit protection (SCP), LED-short protection and Over Temperature protection (OTP). A soft-start feature is provided to minimize in-rush current during start-up. The OCP8172 is available in SOP-14L and SSOP-10L package, and it is RoHS compliant. Operating temperature range of the OCP8172 is fro.

📥 Download Datasheet

Datasheet Details

Part number OCP8172
Manufacturer Orient Chip
File Size 237.88 KB
Description One-Channel High Power LED Controller
Datasheet download datasheet OCP8172 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
OCP8171 CABC Compatible High Efficiency Boost LED Backlight Driver ORIENT-CHIP
OCP8178 White LED Driver ORIENT-CHIP
OCP8178A White LED Driver ORIENT-CHIP
OCP-PCP116 SIX PIN DIP SINGLE CHANNEL PHOTO IC PHOTOCOUPLER ETC
OCP-PCT4116 Transistor/Diode Output Optocoupler Lumex Opto Components

Other Datasheets by Orient Chip

Part Number Description
OCP8107 One-Channel High Power LED Controller
OCP8108A One-Channel High Power LED Controller
OCP8109A One-Channel High Power LED Controller
OCP8110 500mA Buck/Boost Charge Pump LED Driver
OCP8110A 500mA Buck/Boost Charge Pump LED Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
WWW.ORIENT-CHIP.COM OCP8172 One-Channel High Power LED Controller ◼ General Description The OCP8172 is a high power LED driver, non-synchronous boost controller. The OCP8172 can be used for the LED backlight in LCD panels. It is designed for current mode control power converters that require a single drive output, such as boost LED driver and SEPIC topologies. The OCP8172 is suitable for topologies which require a ground source N-channel FET including boost, SEPIC and various LED driver applications. The device features include programmable oscillator frequency, power MOSFET over-current protection (OCP), over-voltage protection (OVP), under-voltage lock-out (UVLO), output to ground short-circuit protection (SCP), LED-short protection and Over Temperature protection (OTP).