AN8041S - Liquid crystal backlight controller

Product Overview

Panasonic Semiconductor

Part number	AN8041S
Manufacturer	Panasonic Semiconductor
File Size	153.08 KB
Description	Liquid crystal backlight controller
Datasheet	AN8041S Datasheet
Additional preview pages of the AN8041S datasheet.

Pin No. 1 FB1 FB2 IN 2 IN+2 GND Out CB VCC Off Voltage Regulators Description Error amplifier 1 inverted input

Operating supply voltage: 3.6 V to 34 V.
1.27 0.40±0.25 (0.605).
Totem pole output circuit: Output current of ±500 mA Seating plane.
Built-in bootstrap circuit.
N-channel power MOSFET can be directly driven SOP016-P-0225A.
Built-in two error amplifier circuits allow both the voltage and current control.
Incorporating on/off functions (active-high control input, standby mode current is 5 µA or less).
Built-in timer latch short-.

📁 Similar Datasheet

AN804 - P-Channel MOSFET (Vishay Siliconix)
AN80196CA - ADVANCED 16-BIT CHMOS MICROCONTROLLER WITH INTEGRATED CAN 2.0 (Intel Corporation)
AN80196CB - ADVANCED 16-BIT CHMOS MICROCONTROLLER WITH INTEGRATED CAN 2.0 (Intel Corporation)
AN805 - PWM Optimized Power MOSFET (Vishay Siliconix)
AN8053N - 1.0W Power Amplifier (Matsushita)
AN809 - Digitally Addressable DALI Dimming Ballast (Microchip)
AN8096JC - (AN8x9xJC) Advanced 16-Bit Microcontroller (Intel)
AN809xJC - (AN8x9xJC) Advanced 16-Bit Microcontroller (Intel)

Other Datasheets by Panasonic Semiconductor

AN8045 - 3-pin/ positive output/ low dropout voltage regulator
AN8045M - 3-pin/ positive output/ low dropout voltage regulator
AN8049FHN - 1.8-volt 3-channel step-up/ step-down/ and polarity inverting DC-DC converter controller
AN8049SH - 1.8-volt 3-channel step-up/ step-down/ and polarity inverting DC-DC converter controller
AN8000 - 3-pin Positive Output Low Dropout Voltage Regulator
AN8000M - 3-pin Positive Output Low Dropout Voltage Regulator

Published: Mar 26, 2005 |