AN8049SH Description
Connection for the capacitor that provides the shortcircuit protection circuit time constant Channel 3 soft start setting Channel 2 soft start setting Channel 1 soft start setting Channel 3 on/off control Channel 2 on/off control Channel 1 on/off control On/off control Reference voltage output Connection for the OUT2 block output source current setting resistor Connection for the OUT1 block output.
AN8049SH Key Features
- Wide operating supply voltage range: 1.8 V to 14 V
- High-precision reference voltage circuit SSOP024-P-0300A
- VREF pin voltage: ±1%
- Error amplifier: ±1.5%
- Surface mounting package for miniaturized and thinner power supplies Package: SSOP-24D 0.5-mm lead pitch 7.8 mm × 6.8 mm
- Supports control over a wide output frequency range: 20 kHz to 1 MHz
- On/off (sequence control) pins provided for each channel for easy sequence control setup
- The negative supply error amplifier supports 0-volt input. mon-mode input voltage range
- 0.1 V to VCC -1.4 V This allows the number of external ponents to be reduced by two resistors
- Fixed duty factor: 86% However, the duty can be adjusted to anywhere from 0% to 100% with an external resistor