Datasheet4U Logo Datasheet4U.com

AN8612NSB - SCSI active terminator

General Description

Pin No.

Pin No.

3 SG line5 SG line4 SG line3 SG line2 SG line1 GND 2 GND 2 SG line18 SG line17 SG line16 SG line15 REG out SG line14 SG line13 SG li

Key Features

  • Active termination for 18-signal line.
  • Low power consumption due to its standby function (100 µA at standby).
  • Small output pin capacitance: 3.8 pF (typ. ).
  • High precision regulator: 2.85 V±60 mV (0.715) (3.20) 0.80 +0.10 0.30.
  • 0.05 0° to 10° 0.50±0.20 Seating plane HSOP030-P-0300 s.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AN86 CMOS Gate Array AMI
AN8 MAGNETIC SENSOR Cherry
AN80196CA ADVANCED 16-BIT CHMOS MICROCONTROLLER WITH INTEGRATED CAN 2.0 Intel Corporation
AN80196CB ADVANCED 16-BIT CHMOS MICROCONTROLLER WITH INTEGRATED CAN 2.0 Intel Corporation
AN804 P-Channel MOSFET Vishay Siliconix

Other Datasheets by Panasonic

Part Number Description
AN8612NSR SCSI Active Terminator
AN8000 3-pin Positive Output Low Dropout Voltage Regulator
AN8000M 3-pin Positive Output Low Dropout Voltage Regulator
AN8001FHK Gradation voltage generation
AN8002 3-pin/ positive output/ low dropout voltage regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ICs for Information Equipment AN8612NSB SCSI active terminator IC s Overview The AN8612NSB is a terminator IC conformed to standard interface specification (SCSI-I/II) for personal computers, workstations and various types of information equipment. So far configured with a fixed resistor and a regulator, it has recently been integrated onto a single chip with built-in standby function. It is easy to satisfy 25 pF of the maximum pin capacitance in SCSI-II specification due to its small output pin capacitance. It can sapport 10 Mbyte/s of SCSI-II and 20 Mbyte/s of FAST-20. 12.63±0.20 (1.90) 24 19 18 13 Unit: mm 2.00±0.20 1 6 7 12 5.50±0.20 7.60±0.30 (1.05) 0.10±0.10 0.20 –0.05 +0.