Datasheet4U Logo Datasheet4U.com

AN8612NSR - SCSI Active Terminator

General Description

Pin No.

115Ω 2 12 13 12, 13 VCC GND VCC 1 1 REGOUT STANDBY 20 kΩ GND s Precautions on Input Capacitance The Interface Termin

Key Features

  • Active termination of 18 signal lines.
  • Low consumption power owing to stand-by function built-in (100µA in stand-by condition).
  • Small output terminal capacitance : 4.5 pF, typ.
  • High accuracy regulator : 2.85V±60mV 0.5 8.4±0.3 11.73±0.3 24-pin SOP Package (HSOP024-P-0450) Number in ( ) is a reference value. s.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AN86 CMOS Gate Array AMI
AN8 MAGNETIC SENSOR Cherry
AN80196CA ADVANCED 16-BIT CHMOS MICROCONTROLLER WITH INTEGRATED CAN 2.0 Intel Corporation
AN80196CB ADVANCED 16-BIT CHMOS MICROCONTROLLER WITH INTEGRATED CAN 2.0 Intel Corporation
AN804 P-Channel MOSFET Vishay Siliconix

Other Datasheets by Panasonic

Part Number Description
AN8612NSB SCSI active terminator
AN8000 3-pin Positive Output Low Dropout Voltage Regulator
AN8000M 3-pin Positive Output Low Dropout Voltage Regulator
AN8001FHK Gradation voltage generation
AN8002 3-pin/ positive output/ low dropout voltage regulator

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AN8612NSR SCSI Active Terminator IC s Overview The AN8612NSR is a terminator IC complying with the standard interface standards [SCSI-I/II] for personal computer, work station and various information equipment. Fixed resistor and regulator which are separately provided in conventional ICs are incorporated in single chip for the AN8612NSR. The stand-by function is also built in the AN8612NSR. Moreover, this IC can easily satisfy the maximum terminal capacitance of 25 pF of the SCSI-II standard, because of its small output terminal capacitance. It can support the 10 M byte/s of SCSI-II and 20 M bytes/s of Fast-20. 0.4±0.25 (6.0) (4.6) 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 Unit : mm (0075) 0.1±0.1 1.