EEETG1V330P Datasheet Text
Aluminum Electrolytic Capacitors/ TG Surface Mount Type
Series:
- -
- -
- TG
Type:
V
- Features
Endurance:125 °C 1000 h to 2000 h Miniaturization (40 % less than TA Series) Low ESR (Low temp) Vibration-proof product is available upon request. (φ8 mm and larger) RoHS directive pliant (Parts No φ8 to φ10 : EEE✽, φ12.5 to φ18 : EEV✽)
- Specifications
Category Temp. Range Rated W.V. Range Nominal Cap. Range Capacitance Tolerance DC Leakage Current tan δ Characteristics at Low Temperature W.V. (V) Z(- 25 °C)/Z(+20 °C) Z(- 40 °C)/Z(+20 °C) 10 3 6
- 40 °C to +125 °C 10 V.DC to 100 V.DC 10 µF to 4700 µF ±20 % (120 Hz/+20 °C) I < 0.01 CV After 2 minutes Please see the attached standard products list 16 25 35 50 63 80 100 2 2 2 2 2 2 2 4 4 3 3 3 3 3
(Impedance ratio at 120 Hz)
After applying rated working voltage for 1000 hours (φ8҂6.2), 2000 hours (φ8҂ 10.2 <) at +125 °C±2 °C and then being stabilized at +20 °C, capacitors shall meet the following limits. Endurance Capacitance change tan δ DC leakage current ±30 % of initial measured value (code U : ±35 %) < 300 % of initial specified value (code U : ±350 %) < initial specified value
Shelf Life
After storage for 1000 hours at +125 °C±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance (With voltage treatment) After reflow soldering and then being stabilized at +20 °C, capacitors shall meet the following limits. Capacitance change ±10 % of initial measured value tan δ < initial specified value DC leakage current < initial specified value
Resistance to Soldering Heat
- Frequency correction factor for ripple current
Frequency (Hz) Correction factor 120 0.65 1k 0.85 10 k 0.95 100 k to 1.00
- Marking
Example : 10 V 100 µF, 10 V 1000 µF Marking coloc : BLACK...