Datasheet4U Logo Datasheet4U.com

PE4231 - SPDT High Power UltraCMOS

General Description

The PE4231 SPDT High Power UltraCMOS™ RF Switch is designed to cover a broad range of applications from DC to 1.3 GHz.

This single-supply reflective switch integrates on-board CMOS control logic driven by a simple, single-pin CMOS or TTL compatible control input.

Key Features

  • Optimized for 75 Ω systems.
  • Single +3-volt power supply.
  • Low insertion loss: 0.80 dB at 1.0 GHz.
  • High isolation: 42 dB at 1.0 GHz.
  • Typical input 1 dB compression point of +32 dBm.
  • Single-pin CMOS or TTL logic control.
  • Low cost Figure 2. Package Type 8-lead MSOP RF1 RF2 CMOS Control Driver CTRL Table 1. Electrical Specifications @ +25 °C, VDD = 3 V (ZS = ZL = 75 Ω) Parameter Operation Frequency Insertion Loss Isolation.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
PE423211 SPDT RF Switch pSemi
PE423422 SPDT RF Switch pSemi
PE423641 SP4T RF Switch pSemi
PE42420 SPDT RF Switch pSemi
PE42421 SPDT RF Switch pSemi

Other Datasheets by pSemi (Peregrine Semiconductor)

Part Number Description
PE4230 SPDT High Power UltraCMOS RF Switch
PE4232 SPST CATV UltraCMOS Switch
PE423422 SPDT RF Switch
PE4235 SPDT UltraCMOS RF Switch DC
PE42359 SPDT UltraCMOS RF Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com Product Specification PE4231 Product Description The PE4231 SPDT High Power UltraCMOS™ RF Switch is designed to cover a broad range of applications from DC to 1.3 GHz. This single-supply reflective switch integrates on-board CMOS control logic driven by a simple, single-pin CMOS or TTL compatible control input. Using a nominal +3-volt power supply, a typical input 1 dB compression point of +32 dBm can be achieved. The PE4231 also exhibits input-output isolation of better than 42 dB at 1.0 GHz and is offered in a small 8-lead MSOP package. The PE4231 SPDT High Power UltraCMOS™ RF Switch is manufactured in Peregrine’s patented Ultra Thin Silicon (UTSi®) CMOS process, offering the performance of GaAs with the economy and integration of conventional CMOS. Figure 1.