PE4261 Overview
The PE4261 SP4T RF UltraCMOS™ Flip Chip Switch is designed specifically to address the needs of the antenna switch module market for GSM Handsets. On-chip CMOS decode logic is used to facilitate two-pin, low voltage CMOS control inputs. High ESD tolerance of 1500 V at all ports, no blocking capacitor requirements and on-chip SAW filter overvoltage protection devices make this the ultimate in integration and ease of...
PE4261 Key Features
- Two pin CMOS logic control inputs
- Low TX insertion loss: 0.55 dB at 900
- Isolation of 39 dB at 900 MHz, 31 dB at RX1 1900 MHz
- Low harmonics 2fo = -82 dBc and
- 1500 V HBM ESD tolerance
- Built in CMOS decoder/driver
- RX SAW over voltage protection circuit
- No blocking capacitors required
- 850 / 900 MHz ANT
- 1800 / 1900 MHz ANT