Datasheet4U Logo Datasheet4U.com

PE42612 - SP4T Switch

Description

The PE42612 SP4T RF UltraCMOS™ Flip Chip Switch is designed specifically to address the needs of the antenna switch module market for GSM Handsets.

On-chip CMOS decode logic is used to facilitate two-pin, low voltage CMOS control inputs.

Features

  • Two pin CMOS logic control inputs.
  • Supports 1.8 V Control Logic.
  • Low TX insertion loss: 0.55 dB at TX1 RX1.
  • TX2 RX2 CMOS Control/Driver and ESD V1 V2 900 MHz, 0.70 dB at 1900 MHz Isolation of 39 dB at 900 MHz, 31 dB at 1900 MHz Low harmonics 2fo = -82 dBc and 3fo = -74 dBc at 35 dBm input power 1500 V HBM ESD tolerance Built in CMOS decoder/driver RX SAW over voltage protection circuit No blocking cap.

📥 Download Datasheet

Datasheet preview – PE42612

Datasheet Details

Part number PE42612
Manufacturer Peregrine Semiconductor
File Size 185.46 KB
Description SP4T Switch
Datasheet download datasheet PE42612 Datasheet
Additional preview pages of the PE42612 datasheet.

📁 Similar Datasheet

  • PE42445 - High Isolation UltraCMOS SP4T RF Switch (pSemi)
  • PE42482 - SP8T RF Switch (pSemi)
  • PE42512 - RF Switch (pSemi)
  • PE42726 - SPDT RF Switch (pSemi)
  • PE4290X - (PE-xxxxX) General Purpose Transformers (Pulse)
  • PE4005 - RF CONNECTOR (Pasternack Enterprises)
  • PE4013S - N-Channel Enhancement Mode Power MOSFET (ChipSourceTek)
  • PE4013SA - N-Channel Enhancement Mode Power MOSFET (ChipSourceTek)
  • PE4025KC - N and P Channel Enhancement Mode Power MOSFET (ChipSourceTek)
  • PE40F - THYRISTOR MODULE (SanRex Corporation)
Other Datasheets by Peregrine Semiconductor

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com Product Brief PE42612 Flip Chip SP4T UltraCMOS™ 2.6 V Switch 100 – 3000 MHz Figure 1. Functional Diagram Features • Two pin CMOS logic control inputs • Supports 1.8 V Control Logic • Low TX insertion loss: 0.55 dB at TX1 RX1 • • • • • • TX2 RX2 CMOS Control/Driver and ESD V1 V2 900 MHz, 0.70 dB at 1900 MHz Isolation of 39 dB at 900 MHz, 31 dB at 1900 MHz Low harmonics 2fo = -82 dBc and 3fo = -74 dBc at 35 dBm input power 1500 V HBM ESD tolerance Built in CMOS decoder/driver RX SAW over voltage protection circuit No blocking capacitors required Figure 2. Die Top View Product Description The PE42612 SP4T RF UltraCMOS™ Flip Chip Switch is designed specifically to address the needs of the antenna switch module market for GSM Handsets.
Published: |