PI74ALVTC16240 Datasheet | Pericom Semiconductor

Features • PI74ALVTC family is designed for low voltage operation, VDD = 1.8V to 3.6V • Supports Live Insertion • 3.6V I/O Tolerant Inputs and Outputs • Bus Hold • High Drive, -32/64m A @ 3.3V .. • Uses patented noise reduction circuitry • Power-off high impedance inputs and outputs • Industrial operation at –40°C to +85°C • Packages available: – 48-pin 240 mil wide plastic TSSOP (A) – 48-pin 173 mil wide plastic TVSOP (K) – 48-pin 300 mil wide plastic SSOP (V) Product Description Peri Semiconductor’s PI74ALVTC series of logic circuits are produced in the pany’s advanced 0.35 micron CMOS technology, achieving industry leading speed. The PI74ALVTC16240 buffer/driver is designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The device can be used as four 4-bit buffers, two 8-bit buffers, or one 16-bit buffer. It provides inverting outputs and symmetrical active-low output-enable (OE) inputs. To ensure the high-impedance state during power up or power down, OE should be tied to Vdd through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. The family offers both I/O Tolerant, which allows it to operate in mixed 1.8/3.6V systems, and “Bus Hold,” which retains the data input’s last state whenever the data input goes to high-impedance, preventing “floating” inputs and eliminating the need for pullup/ down resistors. Logic Block Diagram PS8353A 11/23/98 PI74ALVTC16240 16-Bit Buffer Driver With 3-State Outputs 12345678901234567890123456789012123456789012345678901234567890121234567890123456789012345678901212345678901234567890123456789012123456789012 Product Pin Description Pin Name n OE n Ax n Yx GND VCC Description 3-State Output Enable Inputs (Active LOW) Inputs 3-State Outputs Ground Power Truth Table(1) Inputs n OE L L H n AX H L X Outputs n Yx L H Z .. Notes: 1. H = High Signal Level L = Low...