Pericom Semiconductor PI3USB221
The PI3USB221 is a high-bandwidth switch specially designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os. The wide bandwidth (1.1 GHz) of this switch allows signals to pass with minimum edge and phase distortion. The device multiplexes differential outputs from a USB host device to one of two corresponding outputs.- Min Voltage : 2.3V
- Max Voltage : 3.6V
- Channels : 1
- Max Operating Temp : 85°C
- Min Operating Temp : -40°C
Source:
Octopart
| Part No. | PI3USB221 |
|---|---|
| Datasheet | PI3USB221 Download |
| Manufacturer |  Pericom Semiconductor |
| Description | High-Speed USB2.0 1:2 Multiplexer/DeMultiplexer Switch |
| Buy | Stock & Price |
FEATURES
● VDD Operation at 2.5 V and 3.3 V● VI/O Accepts Signals up to 5.5 V
● 1.8-V Compatible Control-Pin Inputs
● Low-Power Mode When OE Is Disabled (2 µA)
● rON = 6Ω Maximum
● ΔrON = 0.2Ω Typical
● Cio(on) = 6 pF Maximum
● Low Power Consumption (50 µA Maximum)
● ESD > 8kV contact on USB signal path per IEC61000-4-2)
● High Bandwidth (1.1 GHz Typical)
● Packaging (Pb-free & Green): - 10-contact, TDFN (ZE10) - 10-contact, TLLGA (XA10)
APPLICATIONS
● Routes Signals for USB 1.0, 1.1, and 2.0● Mobile Industry Processor Interface (MIPI) Signal Routing PI3USB221 High-Speed USB2.0 1:2 Multiplexer/ DeMultiplexer Switch with Signal Enable
DESCRIPTION
The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. It is designed for low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps). Pin Configuration TDFN Package (Top View) TLLGA Package (Top View) TLLGA...
