Pericom Semiconductor PI3USB223
The PI3USB223 combines AC coupled audio signals and USB2.0 HS (480Mbps) on the same pins. This enables users to use a single connector to drive either a USB end point or an audio end point. The device also incorporates a substrate pump technology which allows -2Vsignals to pass through the switch without causing any leakage.- Min Voltage : 2.7V
- Max Voltage : 4.4V
- Channels : 2
- Max Operating Temp : 85°C
- Min Operating Temp : -40°C
Source:
Octopart
| Part No. | PI3USB223 |
|---|---|
| Datasheet | PI3USB223 Download |
| Manufacturer |  Pericom Semiconductor |
| Description | USB 2.0 High-Speed and Audio Switches |
| Buy | Stock & Price |
FEATURES
● Single +2.7V to +4.4V Supply Voltage● Low 50µA Supply Current
● -3dB Bandwidth: 1500MHz (typ)
● Low 2.5Ω(typ)On-Resistance
● THD+N: 0.02%
● Shorting D+/R and D-/L to Vbus will not cause leakage when VDD = 0
● Internal Shunt Resistors for Click-and-Pop Reduction
● VBUS Detection for Automatic Switch Path Selection
● Packaging (Pb-free & Green available): = 10-pin contact UQFN, 1.4 x 1.8, (ZM10) Truth Table ASEL VDD VBUS L/R D+/D- L/R Shunt X L L OFF OFF OFF X H L OFF OFF ON X L H OFF OFF OFF L H H OFF ON ON H H H ON OFF OFF
DESCRIPTION
PI3USB223 incorporates gate pump technology required to maintain low Ron for ideal audio THD while reducing the capacitance affect of high speed USB signals. The PI3USB223 features protection on D+/R and D-/L to ensure no damage will happen to the IC if these pins are shorted accidentally to Vbus as well as ensuring there is no leakage when VDD is on or off. Also, it includes VBUS detection (VB) to automatically switch to the USB signal path upon detection of a valid VBUS signal.
