SAA3323 - Drive processor for DCC systems

Product Overview

Philips

Part number	SAA3323
Manufacturer	Philips
File Size	274.03 KB
Description	Drive processor for DCC systems
Datasheet	SAA3323 Datasheet
Additional preview pages of the SAA3323 datasheet.

The SAA3323 performs the drive processor function in the DCC system.

This function is built up of digital equalizer, error correction and tape formatting functions.

The digital equalizer is intended for use with DCC read amplifiers TDA1318 or TDA1380.

Operating supply voltage: 2.7 to 3.6 V.
Low power dissipation: 84 mW (typ).
Single chip digital equalizer, tape formatting and error correction.
8-bit flash analog-to-digital converter (ADC) for low symbol error rate.
Two switchable Infinite Impulse-Response (IIR) filter sections.
10-tap Finite Impulse-Response (FIR) filter per main data channel, with 8 bit coefficients, identical for all main channels.
10-tap FIR filter for the AUX.

📁 Similar Datasheet

SAA3006 - Low Voltage Infrared Remote Control Transmitter (Signetics)
SAA3007 - INFRARED REMOTE CONTROL TRANSMITTER (NXP)
SAA3009 - (SAA3009 / SAA3049) Infrared Remote Control Decoders (ETC)
SAA3028 - Infrared Remote Control Transcoder (ETC)
SAA3049 - (SAA3009 / SAA3049) Infrared Remote Control Decoders (ETC)
SAA32M8 - DDR2 SDRAM (SpecTek)
SAA-311100 - Single-Mode FC D-Shape ADAPTOR supplied (Seiko Instruments Inc)
SAA-C505CA-4RC - 8-bit Single-Chip Microcontroller (Bare Die Delivery) (Infineon Technologies AG)

Other Datasheets by Philips

Published: May 18, 2005 |