SAA8103 Datasheet | Philips Semiconductors

FEATURES 2 APPLICATIONS 3 GENERAL DESCRIPTION 4 QUICK REFERENCE DATA 5 ORDERING INFORMATION 6 BLOCK DIAGRAMS 7 PINNING INFORMATION 7.1 Pinning 7.2 Pin description 8 FUNCTIONAL DESCRIPTION 9 OPERATING MODES 9.1 Full Frame CCD 9.2 Frame Transfer CCD 9.3 Standby control function 9.4 Standby mode sequence 10 SERIAL INTERFACES 10.1 Control for V-driver (TDA9991) and CDS or ADC 11 MAND LIST 12 TIMING DIAGRAMS 13 LIMITING VALUES 14 THERMAL CHARACTERISTICS 15 DC CHARACTERISTICS 16 APPLICATION INFORMATION 17 PACKAGE OUTLINE 18 SOLDERING 18.1 Introduction to soldering surface mount packages 18.2 Reflow soldering 18.3 Wave soldering 18.4 Manual soldering 18.5 Suitability of surface mount IC packages for wave and reflow soldering methods 19 DATA SHEET STATUS 20 DEFINITIONS 21 DISCLAIMERS 22 PURCHASE OF PHILIPS I2C PONENTS Objective specification 2001 Oct 22 Philips Semiconductors Pulse Pattern Generator for Frame Transfer CCD (PPGFT) Objective specification 1 FEATURES - Sync signal generator - Supports progressive scan operation - Supports monitoring function - Supports electronic shutter function - Supports Frame Transfer CCD (FXA, FTF and FTT) 8 × 8-kbyte pixels (maximum) - Supports 1, 2 and 4 output functions with Full Frame CCD type sensor - Generates the system clock for signal processing - Base oscillation from 6 to 28 MHz - I2C-bus control. 2 APPLICATIONS - CCD camera - Digital still camera. 3 GENERAL DESCRIPTION The SAA8103 is a pulse pattern generator for the Frame Transfer CCD image sensors: FXA1012, FXA1013, FXA1022, FXA1004, FTF2020, FTF3020 and FTT1010 as well as for the front-end analog processing and signal processing circuit. The circuit generates drive pulses for the CCD, sample-hold pulses for Correlated Double Sampling (CDS), clamp pulses and sync signals. 4 QUICK REFERENCE DATA SYMBOL VDDDx VDDAx IP(tot) VIL VIH VOL VOH Tamb PARAMETER MIN. digital supply voltages: VDDD1, VDDD2, VDDD3, VDDD4 and VDD(OSC) analog supply voltages:...